Vijay Commercial House

We offer:Cathode & Anode PowdersAnode Materials for Lithium-ion Batteries

Anode Materials are the negative electrode in lithium-ion batteries and are paired with cathode materials in a lithium-ion cell. The anode materials in lithium-ion cells act as the host where they reversibly allow lithium-ion intercalation / deintercallation during charge / discharge cycles. General criteria for selection of suitable intercalation-based anode materials include (i) low first cycle irreversible loss, (ii) high coulombic efficiency, (iii) fast lithium-ion diffusion into and out of the anode, (iv) high ionic and electronic conductivity, (v) minimum structural changes upon charge and discharge, (vi) high specific capacity (mAh/g), and (vii) the ability to form and maintain a stable SEI (Solid Electrolyte Interface) layer upon cycling. In addition to standard anode materials, NEI can also provide customized anode materials based on the customer’s needs.

Lithium Titanium Oxide (LTO) Powders »

Lithium titanate (Li₄Ti₅O₁₂) is an electrode material with exceptional electrochemical stability, often used as the anode in lithium-ion batteries for applications that require high rate, long cycle life, and high efficiency. LTO-based batteries are considered safer and have a wider operating temperature range.
Cathode Materials for Lithium-ion Batteries
Cathode Materials are the main component of Li-ion batteries; they determine the energy density of a cell through cell voltage and / or capacity. Lithium ion batteries are typically based on intercalation / deintercallation compounds, where lithium ions provided by the cathode are inserted into the host lattice (anode) during charge and extracted during discharge, with a minimal structural change in the host material. The choice of cathode material with a particular chemistry depends on various factors, including cell voltage, capacity, energy and power capabilities, cycle life, and temperature of operation. NEI provides a variety of cathode materials that are suitable for a wide range of applications. We also provide customized cathode materials based on customer needs.

Lithium Manganese Oxide (LMO) Powders »

Lithium manganese oxide (LiMn₂O₄) is a cathode material with a spinel structure, which allows the material to be discharged at high rates. LMO-based batteries are most suited for use in high rate applications.

Lithium Nickel Cobalt Aluminum Oxide (NCA) Powders

Lithium nickel cobalt aluminum oxide (LiNi_0.8Co_0.15Al_0.05O₂) is a cathode material that has found relatively widespread commercial use. NCA has high usable discharge capacity (∼200 mAh g⁻¹) and long storage calendar life compared to conventional Co-based oxide cathodes. NCA-based batteries are most suited for use in moderate rate applications that require high energy density.

Lithium Manganese Nickel Oxide (LMNO/Spinel) Powders 

Lithium manganese nickel oxide / spinel (LiMn_1.5Ni_0.5O₄) is an attractive cathode candidate for next generation lithium-ion batteries, as it offers high power capability with an operating voltage of ∼4.7 V and a capacity of ∼135 mA h g⁻¹. Due to its high potential, LMNO-based batteries have a higher energy density compared to lithium cobalt oxide and lithium iron phosphate and are used in high rate applications.

Custom Cathode Materials »

High Compacted Density LiNiMnCoO2/NMC

High Rate LiNiMnCoO2 NMC Powder

LiNiMnCoO2 NMC 811 Powder For Lithium Battery Cathode

LiFePO4 Powder LFP Cathode Material For Lithium

CO3O4 Cobaltosic Oxide Powder Supplier

99% Purity MnC2O4 Powder

99% high purity MnC2O4 for battery.

Lithium Carbonate Li2CO3

Cathode Active Materials:  NCA, NMC, LFP, LMO, LCO 

Additional Information:

• Item Code: LTO
• Production Capacity: 1 Ton/week
• Delivery Time: 15 Days

We offer:
lithium battery materials,
Lithium hydroxide mono (mono)Lithium carbonate (high purity)Lithium carbonate (industrial grade)Lithium fluoride (battery grade)Lithium fluoride (industrial grade)Lithium carbonate (battery grade)Lithium hydroxide mono water (battery grade)Lithium bromide solutionLithium bromideLithium chlorideLithium phosphateLithium sulfate

Additional Information:

• Item Code: LiS
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Mumbai
• Production Capacity: 100000 kg
• Delivery Time: 7 days

We offer Lithium X-Y-Z Oxide Cathode materials as follows:

• LiCoO2 : high energy density, low power.
• LiMn2O4 : high power, low energy density.
• LiNiO2 : high energy density, low stability.
• Li(Ni,Mn,Co)O2 : combines the properties of the above three for good energy density, power and stability.
• Li(Ni,Co,Al)O2 : similar to above, more costly and safety concerns.
• LiFePO4 : long lifespan, consistent dis charge, safe, low energy density.
• Li4Ti5O4 : safe, long lifespan and temperature range, low energy density and costly.
• C (Graphite): typically used as the anode to any of the above (or cathode to Li4Ti5O4

Additional Information:

• Item Code: iCathode
• Production Capacity: 100 MT
• Delivery Time: 15 days
• Packaging Details: Drums