Vijay Commercial House

We offer:

Additional Information:

• Item Code: Nb
• Production Capacity: 10 MT
• Delivery Time: 15 days
• Packaging Details: Standard

WE offer:Niobium CrucibleStandard: ASTM B394-98
Grade: RO4200-1, RO4210-2
Purity: Nb >99.9% or 99.95%Niobium Crucible ApplicationsNiobium crucible is used as a container for rare-earth metallurgy, load plates for anodes of tantalum, and niobium electrolytic capacitors sintered high-temperatures. It is also used as corrosion-resistant containers in chemical industries, and evaporation crucibles, and liners.Niobium Crucible SpecificationsWith our many years of experience in the field of powder metallurgy, AEM produces niobium crucibles of exceptionally high purity, high-density precise size, and smooth surface, but without cracks, voids, and irregular protrusions. Our products have a longer service life, which will help you to save your cost.Our company produces various crucibles, such as round mouth crucible, taper crucible, ellipse crucible, and bottomless crucible. It can be produced according to the customers' drawings. If you do not find the niobium crucible size you require, please feel free to contact us.

Additional Information:

• Item Code: Nb1
• Production Capacity: 10000
• Delivery Time: 15 Days
• Packaging Details: Standard

WE OFFER:

 

Civil Tantalum Capacitors

 

Chip Solid Tantalum Capacitors

 

Conventional Chip Tantalum Capacitor CA45 Series

 

Low ESR Chip Tantalum Capacitor CA45L Series

 

Plug-in Solid Electrolyte Tantalum Capacitors

 

Chip Solid Conductive Polymer Tantalum Capacitors

 

General military grade (industrial grade) tantalum capacitor

 

High Temperature Tantalum Capacitors

 

Military Tantalum Capacitors

Additional Information:

• Item Code: iTaC
• Production Capacity: 100 Million
• Delivery Time: 15 days
• Packaging Details: Box

We sell & purchase Tantalum capacitor scrap, tantalum contained sputtering target scrap, and tantalum chemically pure scrap.
It is estimated that there is less than 50 years left of Tantalum resources, based on extraction at current rates, demonstrating the need for increased recycling.

Tantalum Recycling is key source of conflict free Tantalum for the world's high-tech industries that depend on Tantalum.

Tantalum Capacitors —

Tantalum electrolytic capacitors exploit the tendency of tantalum to form a non-conductive protective oxide surface layer. This type of capacitor consists of tantalum powder pressed into a pellet shape as one “plate” of the capacitor, with the oxide as a dielectric, and an electrolytic solution or conductive solid as the other “plate”. The dielectric layer thus can be very thin (thinner than the similar layer in, for instance, an aluminum electrolytic capacitor).

The capacitor typically consists of a sintered Tantalum metallic sponge acting as the anode, a manganese dioxide cathode, and a dielectric layer of Tantalum pentoxide heated on the sponge surface by anodizing

We offer:
Tantalum PentoxideStandard: YS/T427-2012Grade: FTa2O5-1 (99.6%) , FTa2O5-2 (99.4%, FTa2O5-3 (99%) & 
Grades: FTa2O5 -045(99.995), FTa2O5-04 (99.99%), FTa2O5-035 (99.95)Specification: Product should pass through 80 mesh screen
Applications: Mainly used as raw materials for tantalum metal, tantalum alloy, tantalum carbide, tantalum-niobium composite, optical glass and lithium tantalate crystals.

Niobium PentoxideStandard: YS/T428-2012Grade: FNb2O5 -1(99.6), FNb2O5-2(99.4), FNb2O5-3 (99%)Grade: FNb2O5-048(99.998), FNb2O5-045(99.995), FNb2O5-04(99.99), FNb2O5-035(99.95)
Specification: Product should pass through 60 mesh screenApplications: Mainly used as raw materials for metal niobium, niobium bars, niobium alloys, niobium carbides, tantalum niobium composites, electronic ceramics, optical glass and lithium niobate crystals.

Additional Information:

• Item Code: Ta2O5
• Production Capacity: 500 Tons
• Delivery Time: Ready
• Packaging Details: 50 kg drums

We offer:

Tantalum crucible

Additional Information:

• Production Capacity: 5000
• Delivery Time: 30 days

• Tantalum Sheet & Plate
• Tantalum Rod & Bar
• Tantalum Foil & Strip
• Tantalum Wire
• Tantalum Tube
• Tantalum Target
• Tantalum Parts
• Tantalum 2.5% Tungsten
• Tantalum 10% Tungsten
• Tantalum 7.5% Tungsten
• Tantalum 40% Niobium
•     Tantalum Crucibles
• T - 111
• T - 122

We supply Tantalum Foils:

Tantalum is one of the rarest elements on earth. This platinum-gray colored metal has a density of 16.6 g/cm3 which is twice as dense as steel,and melting point of 2,996°C becoming the fourth highest of all metals .Meanwhile, it is highly ductile at high temperatures, very hard and excellent thermal and electrical conductor properties.
Tantalum plate/sheet/disc is produced by cold-rolling process with chemical cleaning for surface,and can almost meet all customer’s requirements .
Dimension
Tantalum plate/sheet:
Thickness (0.15~6.0)mm × Width (50~300)mm× Length (50~1000) mm       
Tantalum disc:Diameter 300mm max ×Thickness (0.15~6.0)mm
Special dimension can be negotiated

Chemical specification

 

Application
 Tantalum plate/sheet are popular for chemical processing applications, where customers can convert it into lining for columns, vessels, tanks, reactors, parts for heat exchangers,and cathodic protection system for Tanks, bridges and other steel structures.

Additional Information:

• Delivery Time: 10 DAYS

We offer:

Materials Chemical composition for Ta and Ta alloy wire: 

Grades: R05200, R05400, UNS Grade R05252 (Ta2.5W), UNS Grade R05255 (Ta10W), UNS Grade R05240 (Ta40Nb)

Tantalum WireProduct Category : Tantalum SeriesProduct properties:
Electrical properties
LC 0.10µA/cm2Formation condition  Formation liquid: 0.1%H3PO4Formation temperature: 90±2Density of the frmation Current: 5mA/cm2Formation voltage/time: 225V/30min
Tantalum wire can take hydrogen, oxygen, and nitrogen away from the atmosphere and is the ideal product for vacuum applications in the lighting industry. Tantalum is corrosion resistant and has good thermal conductivity. It can be used in the manufacture of heating elements, vacuum tubes, and other high-temperature parts.We specializes in providing high purity & uniform shaped tantalum wire with the highest possible density, it can be used in semiconductors, chemical vapor deposition (CVD) and PVD, etc. We also supply tantalum tungsten and tantalum niobium alloy wires.

Additional Information:

• Item Code: Ta1
• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Standard Spool packing

Tantalum powder is a dark grey, combustible metal powder. There are three primary types, each has a distinct physical shape and is derived from a unique process.

• Nodular tantalum powder is made by molten sodium reduction of tantalum salt or solid magnesium reduction of tantalum (V) oxide. The powder is aggregates consisting of primarily particles and pores. It has relatively low density and high surface area.
• Angular tantalum powder is made by hydride and crush of a solid ingot (either electron beam or vacuum arc melted), and de-hydride. The particle looks angular and is non-aggregated; the bulk density is typically higher than that of nodular.
• Spherical tantalum powder is made by plasma inert gas atomization of any powder mentioned above. The particle has a near spherical shape with a relatively smooth surface, and narrow particle size distribution; all of which are critical factors for excellent flow and dense packing.

Tantalum powders are used in:

• Tantalum capacitors. The powder is pressed into a porous pellet, sintered to improve particle bonding, electrolytically anodized to form a pentoxide (V) dielectric layer, coated with a cathode electrolyte, and encaged. This is the largest use of tantalum
• Tantalum mill products. The powder is pressed to a bar and sintered at high temperature to achieve a density as close to the true density as possible. The sintered bar is then processed into wires, rods, sheets, strips, and tubes, etc. Mill products made the sintered bars have finer grain structure, better drawability, and can sustain higher temperatures than those derived from melted bars or ingots.
• New generation of tantalum sputtering target. The target is produced by pressing the powder in pure form or mixed with other metal powders, sintering it to near true density and shaped to a desirable geometry. The target has a uniform, fine grain structure, and has better quality than that made from traditional electron beam melted ingot.
• High temperature or corrosive resistant coating on another metal.
• 3-D printing. This is a new technology which builds the finished part one layer at a time. The process requires a powder with well-defined particle and size distribution to eliminate void in the printing process. Spherical powder is particularly important for this application.
• Alloy additives

TANTALUM COMPOUNDS
We also offer:Tantalum Compounds like Tantalum Pentoxide-Ta205,Tantalum Carbide(TaC);Ta-Nb Carbide(Ta-Nb)C;Lithium Tantalate(LiTa03);Lithium Niobate (LiNb03),Pottasium Tantafluoride etc

Additional Information:

• Item Code: TaNbO2
• Production Capacity: 100 Tons
• Delivery Time: 15 Days