Vijay Commercial House
Kalbadevi, Mumbai, Maharashtra
GST No. 27AAAFV0676R1ZI
Call 08046072837 76% Response Rate
Send Enquiry
TECHNICAL CERAMICS
Beryllium Oxide Metal Powder
| State | Powdered |
| Grade | 99.95% |
| Packaging Size | Bottle |
| Color | White |
| Brand | REE |
| Material | Powder |
| Packaging Type | Bottle |
Other details:
- Beryllium is a Group 2 (IIA) element
- It is a metal and has a high melting point
- At ordinary temperatures, beryllium resists oxidation in air
- Beryllium compounds are very toxic
- Its ability to scratch glass is probably due to the formation of a thin layer of the oxide
- Aquamarine and emerald are precious forms of the mineral beryl, [Be3Al2(SiO3)6]
- Its chemistry is dominated by its tendency to lose an electron to form Be2+
- As this ion is so small it is highly polarising, to the extent that its compounds are rather covalent
- Its small size means that its complexes tend to be tetrahedral rather than octahedral
- Name: beryllium
- Atomic number: 4
- Relative atomic mass (Ar): 9.012182 (3)
- Classification: Metallic
Specification:
| Chemical Formula | Be |
| Form | Solid |
| Color | Black |
Additional Information:
- Item Code: BeO
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
- Port of Dispatch: Mumbai
- Delivery Time: 15 Days
View Complete details
Technical Ceramics-Boron Nitride, Beryllium Oxide, Alumina, Mullite, Silicon Nitride
Product Brochure
| Material | Boron Nitride,Alumina |
| Warranty | 3 months |
| Color | white |
| Brand | IREE |
| Temperature | 1800 C |
| Thermal Conductivity | 15 |
We offer high purity Boron Nitride,Pyrolytic Boron Nitride,Alumina, Mullite, Silicon Carbide, Silicon Nitride,Beryllium Oxide Ceramics and fully stabilized Zirconia products. These impervious fine grained ceramic products are used in many applications where it is necessary to provide a protective atmosphere, in corrosive environments,at high temperatures without contamination. Material selection depends upon operating working conditions such as peak temperature, chemical environment, and abruptness of temperature change.
Standard products include various tubes, rods, crucibles, plates, nozzles, rings and labware items that are available for manufacture and design. We also have a significant capability for producing custom engineered products. Give us a call at or email us, so one of our experienced engineers can assist you in the material selection and design of your advanced ceramic component.
Additional Information:
- Item Code: iBN
- Production Capacity: 100000
- Delivery Time: 21 days
View Complete details
Alumina Ceramics Tubes for Thermocouples
Minimum Order Quantity: 100 Piece
Product Brochure
| Size | 1/4 inch-1 inch |
| Usage/Application | Industrial |
| Material | Alumina,Zirconium |
| Tube Type | Single Bore, Double Bore, Four Bore, Closed One End |
| Application | Thermcouple,Heaters |
| Temperature Range | 1800 |
| Color | Off White |
| Max Temperature Resistance | 1800 |
| Features | 99% |
| Dimension | 10-50 |
Home>Materials> Alumina Ceramics
Alumina Ceramic, also known as Aluminium Oxide or Al2O3, it is the one of the most widely used technical ceramic materials. Alumina ceramic components can be manufactured in a range of purities to suit for different applications. Forming methods will vary with the different size, shape and using requirement of products. Alumina ceramics are mainly used for mechanical, electrical, high temperature applications.Typical properties:
| Application examples:
|
Forming methods for Alumina Ceramics:
|
| Material Data Sheet |
| Purity | 95% Alumina | 96% Alumina | 99% Alumina | 99.5% Alumina | 99.7% Alumina |
| Color | White/Pink | White | Ivory | Ivory | Ivory |
| Density (g/cm3) | 3.65 | 3.72 | 3.88 | 3.90 | 3.92 |
| Moh's Hardness | 9 | 9 | 9 | 9 | 9 |
| Fracture Toughness (Mpa.m1/2) | 3-4 | 3-4 | 4 | 4 | 4 |
| Flexural Strength (Mpa) (25℃) | 352 | 358 | 364 | 379 | 375 |
| Compressive Strength (Mpa) (25℃) | 2000 | 2068 | 2500 | 2600 | 2500 |
| Thermal Conductivity (W/m.k) (25℃) | 18-25 | ≥24 | 27 | 30 | 30 |
| Thermal Expansion Coefficient (25-1000℃)(10-6mm/℃) | 8 | 8 | 8 | 8 | 8 |
| Therma Shock Resistance △T(℃) | 220 | 220 | 180-200 | 180-200 | 180-200 |
| Max. Working Temperature (℃) | 1500 | 1650 | 1700 | 1750 | 1750 |
| Dielectric Strength (kv/mm) | 16 | 17 | 20 | 22 | 22 |
| Electrical Resistivity (Ω.cm) (25℃) | 1014 | 1014 | 1014 | 1014 | 1014 |
| Dielectric Constant (@1MHz, 25℃) | 9 | 9 | 9.7 | 9.7 | 9.8 |
| Dielectric Loss (tan delta) (@1MHz, 25℃) | 0.0004 | 0.0002 | 0.0001 | 0.0001 | 0.0001 |
Additional Information:
- Item Code: Al2O3
- Delivery Time: 15 Days
View Complete details
Chemical Set High Temperature Cements
Minimum Order Quantity: 10 Piece
| Packaging Size | 310 ml |
| Color | White |
| Brand | iREE |
| Model Number | 111 |
| Packaging Type | Bucket |
| Application Industry | Thermocouples,Heaters |
| Surface Of Application | Metal |
| Form | Powder |
| Grade Standard | Industrial |
| Strength | High |
| Material Compatibility | Metal, Ceramic |
| Chemical Resistance | Acids |
| Appearance | Off White |
| Fixture Time | 20 Minutes |
| Curing Time | 18~24 Hrs |
| Cure Mechanism | If it is desired to accelerate the cure, low temperature oven drying at 180oF can be used. |
| Operating Temperature | 1300 Deg C |
| Density | 1.97 gm/cm3 |
| Is It Eco Friendly | Yes |
| Melt Viscosity | NA |
| Application | Thermocouples,Heaters,Furnaces |
hermal Potting Cement No. 11 is primarily used where high electrical insulation and thermal conductivity are desired. No. 11 is a chemical-setting cement ideal for potting applications subject to high temperature and thermal shock.
Thermal Potting Cement No. 11 is formulated to be compatible with most metal alloys that it may contact. The cement is supplied in powder form and need only be mixed with water to apply.
- High electrical resistance.
- Heat conductive and thermal shock resistant.
- Withstands temperatures to 2200oF (1204oC).
- Ideal for potting applications.
- Chemical set.
- Odorless.
Additional Information:
- Production Capacity: 1000000
- Delivery Time: 15 days
- Packaging Details: Plastic CAns
View Complete details
Bulletproof Vest Jacket
Minimum Order Quantity: 100 Piece
| Model Name/Number | IBull99 |
| Color | Yellow |
| Usage/Application | Police |
| Material | Aramid |
| Size | All |
| Sleeves Type | Full Sleeves |
| Pattern | Design |
Our Saviour vest offers the maximum protection in our advanced armour range. Based on a standard tactical vest, the Saviour vest has an additional throat, collar, thigh, shoulder, bicep and groin protection. All of these additional components are removable if the mission dictates, allowing the user to use the Saviour vest as a standard vest.
Features- BALCS Style NIJ 0101.06 Level IIIA Kevlar Soft Armour.
- Additional removable Kevlar protection around the shoulders and biceps, throat, thigh and groin areas. Ideal for Internal Security use or high threat areas
- MOLLE / PALS Load attachments
- Comfort Padding on Front and Back
- Adjustable Shoulders for improved comfort
- 3D Mesh for improved airflow around the body of the wearer
- External and Internal waistbands (adjustable) to secure the vest to the wearer.
- Two Leg rig with buckles attachment.
- Sturdy drag strap on Rear of Vest
- Allowance for 10" x 12" Hard Armour Panels
- Available in PU coated hardwearing Nylon fabric, Cordura and Cotton fabric in a range of colours.
- SAP protects against 9mm Bullets as per NIJ Level IIIA.
- Can be upgraded to NIJ LEVEL III, III+, IV, depending upon the HAP used
- Washable outer cover
- Transfer soft armour protection from one carrier to another
- BP Vest bag/Carrier
Additional Information:
- Item Code: iBull99
- Production Capacity: 1000000
- Delivery Time: 45 days
View Complete details
EXPLORE MORE CATEGORIES