Vijay Commercial House

WE OFFER :-

Lithium hydroxide (LiOH) CAS 1310-66-3

Chemical Name: Lithium hydroxide; Lithium hydroxide anhydrous (Industrial grade and Electronic grade)

CAS No.: 1310-65-2

Molecular Fomula: HLiO

Chemical Structure:

Molecular Weight: 23.95

Appearance: White crystal powder

Delivery of lithium hydroxide is carried out in soft containers (polypropylene bags with polyethylene liner) of 20, 25, 500 and 1000 kg (bags of the "Big-Bag" type). Lithium hydroxide package complies with international standards and allows to transport product over long distances without changing the physical and chemical properties of the product. Pallets are placed at standard 20- or 40-foot containers that can be shipped anywhere in the world.

One of the main components for the production of lithium hydroxide is lime. IREE uses high quality lime of its own production. The lime production workshop was established in 1956 on the basis of a limestone quarry located a few kilometers from the plant and developed by IREE till the present time. High quality lime of IREE is based on the chemical composition of mined limestones (CaO content - more than 56 %), which reduces the amount of impurities in lithium hydroxide.
Lithium hydroxide (LiOH) CAS 1310-66-3Lithium hydroxide (LiOH) CAS 1310-66-3

Additional Information:

• Item Code: LiOH
• Production Capacity: 500 Tons
• Delivery Time: 30 days
• Packaging Details: Drums

We offer following FUEL CELL (SOFC) MATERIALS:

1) Yttria Stabillized Zirconia (8SYZ)
2) Gadolinia Doped Ceria (GDC)
3) Lanthanum Strontium Manganite

Solid Oxide Fuel Cells (SOFC) are a type of fuel cell that use a solid oxide material as the electrolyte. SOFCs use a solid oxide electrolyte to to conduct negative oxygen ions from the cathode to the anode. The electrochemical oxidation of the oxygen ions with hydrogen or carbon monoxide thus occurs on the anode side.

Solid Oxide Fuel Cells (SOFC) operate at very high temperatures (500 - 1,000°C). At these temperatures, SOFCs do not require costly platinum catalyst, as is currently necessary for lower-temperature fuel cells such as Proton Exchange Membrane Fuel Cells (PEMFC), and are not vulnerable to carbon monoxide catalyst poisoning. However, vulnerability to sulfur poisoning has been widely observed and the sulfur must be removed before entering the cell through the use of adsorbent beds or other means.

SOFCs have a wide variety of applications from use as auxiliary power units in vehicles to stationary power generation with outputs from 100W to 2MW. Higher operating temperatures make SOFCs suitable candidates for application with heat engine energy recovery devices or combined heat and power, which increases overall fuel efficiency.

Solid oxide fuel cell technology is the technology which can be driving force to change the course of action of the modern era due to its optimal power generation features with maximum electrical efficiency for automobiles and household devices. Fuel cells can be best described as electrochemical devices that make use of fuel oxidation to convert chemical energy into electrical energy and also lower the amount of oxidant simultaneously.

 

A typical SOFC consists of a cathode, anode and an electrolyte constituting a single cell. These single cells are stacked together for a bigger assembly to produce higher degree of power. The solid electrolyte fills the gap between the cathode and anode transporting O2− ions only. This leaves out electrons as transporting medium, which then pass through the cell via external circuit. Out of the two electrodes, oxidation of fuel takes place at the anode and reduction of oxygen takes place at the cathode. The SOFCs operate at higher temperatures of 600–1200°C producing heat as a byproduct of high quality, actively encouraging quick electrocatalysis utilizing non-precious metals and allowing internal restructuration. The SOFC can also work with high purity hydrogen for proton transport other than O2− ion transport. There are many ceramic materials which have been engineered to act as efficient electrolyte materials. Yttria-stabilized zirconia (YSZ) is the most widely used material as solid electrolyte in SOFC.